V-belt Movendis P-B75
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B75 and any equivalents.
The Movendis P-B75 is a classical wrapped V-belt in the B profile, measuring 1900 mm long with a 17 mm top width and 11 mm height. Before you fit it, check the drive and sheaves so the new belt seats and runs as intended.
Inspect sheave grooves for wear, rust, burrs or embedded debris. A groove worn wide or a sheave that is misaligned will let a new belt sit low or run off-center, which shortens belt life and can damage the driven equipment. Check alignment with a straightedge across both sheaves and correct any offset or angular error before installing the P-B75.
Confirm the sheave groove angle and width suit a B-profile belt with a 40° angle, 17 mm top width and 11 mm height. Clean the grooves, then tension the belt according to your drive manufacturer's procedure. After the first run-in period, recheck tension and re-tension if needed.
For a quote, send the part number P-B75 and the quantity you need. If you are replacing a belt on an existing drive, include the drive details and any marking from the old belt so we can help confirm the B-profile, 1900 mm length and 40° angle match.
Dimensions
- Section
- B
- Length
- 1900mm
Frequently asked questions
- What are the dimensions of the Movendis P-B75?
- It is a classical wrapped V-belt in the B profile, 1900 mm long, with a 17 mm top width, 11 mm height and 40° angle.
- What should I check before installing this belt?
- Inspect the sheave grooves for wear, rust or debris, verify sheave alignment, and confirm the groove angle and width suit a B-profile belt with a 40° angle, 17 mm top width and 11 mm height.
- How do I request a quote for the P-B75?
- Send the part number P-B75 and the quantity you need by WhatsApp or email. If you are replacing an existing belt, include the drive details and the marking from the old belt so we can help confirm the profile and length.