V-belt Movendis P-B58
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B58 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B58 and any equivalents.
The Movendis P-B58 is a classical wrapped V-belt in the B profile, with a 1473 mm length. It is built to a 40-degree angle, with a 17 mm top width and an 11 mm height. This page gives you the profile and length data you need to confirm it against your drive.
The B profile is a standard classical cross-section, so the P-B58 fits drives that call for a B-section belt. The 1473 mm length is the datum to match against your existing belt or your drive's required length. Top width is 17 mm and height is 11 mm, both consistent with the B profile. The 40-degree angle is the included angle of the belt's cross-section.
If you are replacing a worn belt, the cleanest starting point is the marking on the back of the old belt. Note the profile letter and the length, then compare them with the P-B58. If the old belt is unmarked or the marking is worn away, measure the outside length and the top width, and send those numbers with your quote request. We can help confirm whether this belt is the right match or suggest an equivalent.
For a quote, send the part number P-B58, the quantity you need, and any details about the drive, such as the pulley diameters or the application. If you are ordering for a multi-belt drive, tell us how many belts the drive uses so we can help you plan a matched set. We carry the Movendis line and reply promptly by WhatsApp or email.
Dimensions
- Section
- B
- Length
- 1473mm
Frequently asked questions
- What do the profile and length tell me about the P-B58?
- The profile is B, a classical V-belt cross-section, and the length is 1473 mm. Those two values are the primary selection criteria: the belt must match the pulley groove profile and the drive's required length.
- How do I confirm the P-B58 matches the belt I am replacing?
- Read the marking on the back of the old belt. If it shows a B profile and a 1473 mm length, the P-B58 is the same size. If the marking is not readable, measure the outside length and top width and send those numbers with your request.
- What should I send to request a quote for the P-B58?
- Send the part number P-B58, the quantity, and any drive details you have, such as pulley diameters or the number of belts on the drive. We will reply by WhatsApp or email and can help confirm the right belt or suggest an equivalent.