V-belt Movendis P-B54.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B54.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B54.5 and any equivalents.
The Movendis P-B54.5 is a classical wrapped V-belt with a B profile and a length of 1385 mm. It measures 17 mm across the top, 11 mm in height and has a 40-degree angle. Before you fit it, check the drive and sheaves.
A new belt will not correct a worn drive. Inspect the sheave grooves for wear, rust or burrs, and confirm the grooves match the 17 mm top width and 40-degree angle of this B-profile belt. Check that the sheaves are aligned and that the driven equipment turns freely by hand. If a groove is worn oversize, the belt will sit too deep and slip even when correctly tensioned.
The P-B54.5 is a classical wrapped V-belt with an 11 mm height and a 1385 mm length. Confirm the old belt's marking and measure its outside length before ordering, since a belt that has run for a long time may have stretched. When you replace a belt on a multi-belt drive, fit a full set of belts from the same production so the load is shared evenly.
Send the part number P-B54.5 by WhatsApp or email to request a quote. If you are unsure whether this B-profile, 1385 mm belt is the right fit for your drive, include the drive make and model, the sheave diameters and the old belt marking, and the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 1385mm
Frequently asked questions
- What are the dimensions of the Movendis P-B54.5?
- It has a B profile, a length of 1385 mm, a top width of 17 mm, a height of 11 mm and a 40-degree angle.
- How do I check the drive before fitting this belt?
- Inspect the sheave grooves for wear, rust or burrs, confirm the grooves match the 17 mm top width and 40-degree angle, check sheave alignment and make sure the driven equipment turns freely by hand.
- What should I send to request a quote for the P-B54.5?
- Send the part number P-B54.5 by WhatsApp or email. If you need help confirming the fit, include the drive make and model, the sheave diameters and the marking from the old belt.