V-belt Movendis P-B49.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B49.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B49.25 and any equivalents.
The Movendis P-B49.25 is a classical wrapped V-belt with a B profile and a 1250 mm length. It measures 17 mm across the top, 11 mm in height, and has a 40° angle. Use these dimensions to match the belt you are replacing.
When a drive is down, the fastest way to confirm the right replacement is to read the marking on the old belt and compare it to the P-B49.25. Check the profile letter and the length in millimeters. The B profile is a classical cross-section, not a narrow wedge belt, so the width and height must match the pulley groove. This belt is 17 mm top width, 11 mm height, and 1250 mm long.
If the old marking is worn or missing, measure the belt directly. Lay it flat and measure the top width and height with a caliper, then measure the length. Compare those numbers to the P-B49.25: 17 mm top width, 11 mm height, 1250 mm length, and a 40° angle. A belt that is too wide will sit high in the groove; too narrow and it will bottom out. Either condition shortens belt life and can damage the pulley.
For a quote, send the part number P-B49.25 along with the old belt marking or your measurements. If you are unsure whether this classical B profile fits your drive, send a photo of the pulley groove and the old belt. We carry the Movendis line and can help you confirm the match before you order.
Dimensions
- Section
- B
- Length
- 1250mm
Frequently asked questions
- How do I match the Movendis P-B49.25 to my old belt?
- Compare the profile letter and the length. The P-B49.25 is a B profile, 1250 mm long, 17 mm top width, 11 mm height, with a 40° angle. If your old belt has the same B profile and 1250 mm length, it is the same size.
- What should I send to get a quote for this belt?
- Send the part number P-B49.25 and the marking from your old belt, or your measured top width, height, and length. A photo of the old belt and pulley can also help confirm the profile.
- Can I use this belt if my old belt marking is unreadable?
- Yes. Measure the old belt: top width, height, and length. Compare those to 17 mm top width, 11 mm height, and 1250 mm length. If they match, the P-B49.25 is the correct size.