V-belt Movendis P-B47
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B47 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B47 and any equivalents.
The Movendis P-B47 is a classical wrapped V-belt in the B profile, with a 1200 mm length. It is used on drives that specify a classical B-section belt, such as fans, pumps, blowers and other general industrial equipment. Confirm fit by the belt marking and the drive pulley groove.
This belt has a top width of 17 mm, a height of 11 mm and a 40° angle. Its wrapped construction suits standard classical V-belt drives where the pulley groove is cut for a B-section belt. The part number P-B47 and the profile marking on the back of the belt identify it.
To confirm fit, read the old belt's marking and measure its length. Match the profile B and the 1200 mm length. Check that the pulley grooves are clean and not worn, and that the belt sits correctly in the groove without bottoming out.
When replacing a classical V-belt, inspect the drive for worn pulleys, misalignment and proper tension. If multiple belts run on the same drive, replace them as a set to keep load sharing even. Send the belt marking or part number for a quote.
Dimensions
- Section
- B
- Length
- 1200mm
Frequently asked questions
- How do I confirm the Movendis P-B47 fits my drive?
- Check that your drive uses a B profile classical V-belt and that the old belt is marked with a 1200 mm length. The P-B47 has a 17 mm top width, an 11 mm height and a 40° angle.
- What should I send to request a quote for this belt?
- Send the part number P-B47, or the marking on the back of your old belt, along with the profile and length. Photos of the belt and pulley can help confirm the correct replacement.
- Can I replace just one belt on a multi-belt drive?
- On drives with multiple belts, it is common practice to replace all belts as a set so they share the load evenly. Inspect the pulleys and alignment at the same time.