V-belt Movendis P-B41.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B41.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B41.25 and any equivalents.
The Movendis P-B41.25 is a classical wrapped V-belt in a B profile, 1050 mm long. It is used on conventional industrial drives where a wrapped classical belt is specified, such as fans, pumps, blowers and other general-purpose equipment. Use the marking on the old belt and the drive dimensions to confirm it is the correct replacement.
This belt has a B profile with a 17 mm top width, an 11 mm height and a 40 degree angle. The 1050 mm length is the datum length to match against the old belt or the drive specification. Classical wrapped construction suits drives that run at moderate speeds and need a belt that grips the pulley groove reliably.
To confirm fit, read the part number and profile from the back of the belt you are replacing and compare it with P-B41.25. Check the pulley groove profile and the number of grooves, then measure the drive to verify the 1050 mm length. If the old belt is worn or the marking is unreadable, send photos of the belt and the drive, along with the pulley diameters and center distance, and we can help confirm the right belt or suggest an equivalent.
When a drive uses multiple belts, replace the full set at the same time so the load is shared evenly. Inspect the pulleys for wear, alignment and debris before installing the new belt. Send the part number P-B41.25 by WhatsApp or email to request a quote.
Dimensions
- Section
- B
- Length
- 1050mm
Frequently asked questions
- How do I confirm that the P-B41.25 is the right belt for my drive?
- Compare the part number, B profile and 1050 mm length with the marking on the old belt. Also check the pulley groove profile and the drive dimensions. If anything is unclear, send photos and the drive details and we can help confirm it.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts on the drive at the same time. Mixing a new belt with worn belts can cause uneven loading. Use the same part number and profile for the full set.
- What information should I send to request a quote?
- Send the part number P-B41.25, the quantity you need, and any details about the drive or the old belt. If you are unsure of the part number, include photos of the belt marking and the pulleys.