V-belt Movendis P-B394
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B394 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B394 and any equivalents.
The Movendis P-B394 is a classical wrapped V-belt with a B profile and a 10000 mm length. It is built to a 17 mm top width, 11 mm height and a 40° angle. Use the marking on the belt you are replacing to confirm these values before you order.
The most reliable way to match this belt is to read the marking on the back of the old belt and compare it with the P-B394. Check the profile letter, the length in millimeters, the top width, the height and the angle. If the old belt is worn or the marking is unreadable, measure the length and cross-section and compare them with the values above.
A B-profile classical V-belt with a 10000 mm length is a long, single belt, so confirm that the drive uses one belt rather than a set of banded belts. Inspect the sheaves for wear, alignment and debris before installation, and check that the belt sits correctly in the groove. If the drive runs multiple belts, replace them as a set so the load is shared evenly.
Send the part number P-B394 by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt, include the marking from the old belt, the profile, the length and the cross-section dimensions with your request. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 10000mm
Frequently asked questions
- How do I confirm that the P-B394 matches my old belt?
- Read the marking on the back of the old belt and compare the profile, length, top width, height and angle with the P-B394 values: B profile, 10000 mm length, 17 mm top width, 11 mm height and 40° angle. If the marking is unreadable, measure the old belt and compare the same dimensions.
- What should I send with my quote request?
- Send the part number P-B394. If you are not certain it is the correct belt, also send the marking from the old belt and the profile, length and cross-section dimensions. The team can confirm the right belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- If the drive uses a set of belts, replace them as a set so they share the load evenly. Inspect the sheaves for wear and alignment before installing the new belt.