V-belt Movendis P-B38
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B38 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B38 and any equivalents.
The Movendis P-B38 is a classical wrapped V-belt in a B profile. It measures 965 mm in length, with a 17 mm top width, 11 mm height and a 40-degree angle. We carry this belt for maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
When a drive is down, the fastest way to identify the replacement is to read the marking on the back of the old belt. The P-B38 code tells you the series and profile, while the length is the 965 mm figure. Cross-check the top width of 17 mm, the height of 11 mm and the 40-degree angle against the belt you are replacing. If the old belt is worn or the marking is unreadable, measure the length and the cross-section instead.
The P-B38 fits drives that use a B-profile classical V-belt. Its wrapped construction is suited to general industrial power transmission. Confirm that the pulley groove matches the 17 mm top width and the 40-degree angle before installation. Replace belts in matched sets where the drive uses multiple belts, and inspect pulleys for wear or misalignment at the same time.
Dimensions
- Section
- B
- Length
- 965mm
Frequently asked questions
- How do I confirm the P-B38 is the right belt?
- Read the marking on the back of your old belt. If it shows P-B38, the profile and length match. You can also measure the outside length and check the cross-section against the 17 mm top width, 11 mm height and 40-degree angle.
- What information should I send for a quote?
- Send the part number P-B38, the quantity you need, and the drive or equipment it fits. If the old belt marking is unclear, include the measured length and the profile. We reply by WhatsApp or email.
- Can you help if the old belt marking is worn off?
- Yes. Send a photo of the belt and pulley, or the measured length, top width and height. We can confirm whether the P-B38 or another profile matches your drive.