V-belt Movendis P-B37
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B37 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B37 and any equivalents.
The Movendis P-B37 is a classical wrapped V-belt in a B profile. It measures 940 mm in length, with a 17 mm top width, 11 mm height and a 40° angle. This belt is used on conventional industrial drives where a wrapped classical V-belt is specified.
To confirm fit, check the drive's pulley groove profile and the required belt length. The P-B37 is a B-profile belt, so the pulley groove must match that profile. The 940 mm length and 17 mm top width are the key dimensions to compare against the belt you are replacing. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and note the profile from the pulley groove.
Classical wrapped V-belts like the P-B37 are common on fans, pumps, compressors and other general industrial drives. Wrapped construction helps resist oil and heat in normal operating conditions. When replacing, inspect the pulleys for wear, alignment and debris. A worn pulley groove can shorten belt life even if the new belt is correct.
Dimensions
- Section
- B
- Length
- 940mm
Frequently asked questions
- How do I confirm the P-B37 fits my drive?
- Check that the pulley groove is a B profile and that the required belt length is 940 mm. The belt's top width is 17 mm and its height is 11 mm. Compare these dimensions with the belt you are replacing.
- What should I send to request a quote for this belt?
- Send the part number P-B37, along with the profile and length if you have them. If you are unsure, include the pulley groove profile and the old belt's marking or dimensions.
- Can I use this belt on a drive that uses a different profile?
- No. The P-B37 is a B-profile classical V-belt. It must be matched to a pulley groove of the same profile and to the required 940 mm length.