V-belt Movendis P-B360
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B360 and any equivalents.
A wrapped classical V-belt is often identified from the marking printed on its back, not from a measurement taken off the drive. The Movendis P-B360 is a B profile classical V-belt with a 9150 mm length, so the code on the old belt is the fastest way to confirm what you are replacing. Read that marking before the belt comes off the drive.
The P-B360 carries the B profile at 17 mm top width and 11 mm height, with a 40 degree angle and a 9150 mm length. When you read the back of a worn belt, the profile letter and the length code are the two values to record first. Copy them exactly as printed, including any prefix, and note the belt type so the replacement matches the original construction.
If the marking is worn away or the belt has been replaced before with something else, measure the drive instead: sheave groove width, the number of grooves, and the center distance. Send the part number you found, the profile, the length, and a photo of the old belt marking. Our team can confirm the right belt or suggest an equivalent.
Classical wrapped V-belts are commonly replaced as a set when a drive runs more than one belt, since belts that have run together take a matched set. Give the quantity per drive when you request a quote.
Dimensions
- Section
- B
- Length
- 9150mm
Frequently asked questions
- What marking should I look for on the old belt?
- Look for the profile letter and the length code on the back of the belt. For this belt those are B and 9150 mm, along with the part number P-B360. Write them down exactly as printed before the belt is removed.
- What if the marking on my belt is unreadable?
- Measure the sheave groove width, count the grooves, and measure the center distance of the drive. Send those measurements with a photo of the belt and we can help identify the correct profile and length.
- How do I request a quote for the P-B360?
- Send the part number P-B360 by WhatsApp or email, along with the quantity you need per drive. If you are unsure of the number, send the marking from the old belt or your drive measurements and we will confirm.