V-belt Movendis P-B285
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B285 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B285 and any equivalents.
The Movendis P-B285 is a classical wrapped V-belt in the B profile, with a length of 7240 mm. Its 17 mm top width, 11 mm height and 40-degree angle match the dimensional envelope of a standard B-section drive.
For a buyer, the profile and the length are the two figures that decide whether a belt fits. The B profile sets the cross-section that must sit correctly in the pulley groove, while 7240 mm is the datum length the drive was built around. Both are stated here as measured values, so they can be checked directly against the belt being replaced or against the drive drawing.
This is a classical wrapped construction, the type commonly used on general industrial drives where the belt runs over standard B-section pulleys. Before ordering, confirm the marking on the back of the old belt and the groove width of the pulleys, since a different profile will not seat properly even if the length appears close.
To request a quote, send the part number P-B285 and the quantity by WhatsApp or email. If you are unsure which belt is on the drive, send the full marking from the old belt or the pulley dimensions, and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 7240mm
Frequently asked questions
- What do the profile and length of the P-B285 tell me?
- The B profile defines the cross-section that must match the pulley groove, and 7240 mm is the length the drive requires. The top width is 17 mm, the height is 11 mm and the angle is 40 degrees.
- How do I confirm this belt matches the one on my drive?
- Read the marking on the back of the old belt and compare the profile letter and the length. You can also measure the pulley groove width and the drive center distance to verify the B section.
- What should I send to get a quote?
- Send the part number P-B285 and the quantity you need by WhatsApp or email. If you are replacing a belt with an unclear marking, include the old belt's full marking or the pulley dimensions so the team can confirm the match.