V-belt Movendis P-B256
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B256 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B256 and any equivalents.
The Movendis P-B256 is a classical wrapped V-belt in a B profile, with a 6500 mm length, a 17 mm top width, an 11 mm height and a 40-degree angle. It is part of the Movendis Classical Wrapped V-Belts series. This page covers what to check on the drive before fitting the belt.
Before you install the P-B256, inspect the sheaves. Look for worn grooves, rust, oil or debris that can shorten belt life. Check that the sheaves are aligned and that the grooves match the B profile. Confirm the driven and driving sheaves turn freely and that the take-up adjustment has enough travel for a 6500 mm belt.
Measure the old belt and compare it with the P-B256 marking. The profile is B, the length is 6500 mm, the top width is 17 mm, the height is 11 mm and the angle is 40 degrees. If the old belt has stretched or the drive has been modified, verify the required length before ordering.
When you request a quote, send the part number P-B256 and the quantity. If you are replacing a belt on a drive you cannot identify, send the marking on the back of the old belt, the sheave diameters and the center distance. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 6500mm
Frequently asked questions
- What are the dimensions of the Movendis P-B256 belt?
- The P-B256 is a B profile classical V-belt with a 6500 mm length, a 17 mm top width, an 11 mm height and a 40-degree angle.
- What should I check before fitting this belt?
- Check the sheave grooves for wear, rust or oil, confirm the sheaves are aligned, and make sure the drive has enough adjustment to tension a 6500 mm belt. Also compare the old belt marking with the new belt.
- How do I request a quote for the P-B256?
- Send the part number P-B256 and the quantity by WhatsApp or email. If you need help confirming the belt, include the marking on the old belt, the sheave diameters and the center distance.