V-belt Movendis P-B20
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B20 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B20 and any equivalents.
The Movendis P-B20 is a classical wrapped V-belt with a B profile and a length of 508 mm. It is used in general industrial drives where a wrapped classical belt is specified. Confirm fit by matching the profile and length to your drive.
This belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. The B profile and 508 mm length are the key dimensions to check against your existing belt or drive specifications. Classical wrapped V-belts like this one are common on fans, pumps, compressors and other equipment that runs at moderate speeds.
To confirm fit, read the marking on the back of the old belt. If it shows a B profile and a 508 mm length, the P-B20 is the correct size. If the marking is worn or missing, measure the top width and the outside length. The profile and length must match the drive pulley groove and the required center distance.
When you request a quote, send the part number P-B20 or the profile and length. If you are replacing a belt on a drive with multiple belts, note the quantity so the set can be matched. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 508mm
Frequently asked questions
- What does the P-B20 fit?
- It fits drives that use a B profile belt with a 508 mm length. Check the marking on your old belt or measure the top width and outside length to confirm.
- How do I confirm the profile and length?
- Look for a B profile and a 508 mm length on the back of the old belt. If the marking is not readable, measure the top width (17 mm) and the outside length.
- What should I send for a quote?
- Send the part number P-B20, or the profile and length, along with the quantity you need. If you are unsure, send a photo of the old belt marking.