V-belt Movendis P-B187
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B187 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B187 and any equivalents.
The Movendis P-B187 is a classical wrapped V-belt in a B profile, measuring 4750 mm in length. It is built with a 17 mm top width, 11 mm height and a 40-degree angle. This belt suits standard industrial drives where a classical V-belt is specified.
Classical wrapped V-belts like the P-B187 are commonly used on general industrial machinery, including pumps, fans, compressors and other driven equipment that accepts a B-section belt. The wrapped construction is typical for drives that need a belt with a fabric cover.
To confirm fit, check the old belt's marking for the B profile and the 4750 mm length, then measure the top width and height if the marking is worn. The 40-degree angle and 17 mm by 11 mm cross-section must match the pulley groove. If the drive uses multiple belts, replace them as a set so the load stays even across all grooves.
When the belt is not marked or the number is unreadable, send the profile, length and cross-section dimensions with your quote request. We can help confirm the right belt or suggest an equivalent based on those details.
Dimensions
- Section
- B
- Length
- 4750mm
Frequently asked questions
- How do I confirm the P-B187 fits my drive?
- Check the old belt for a B profile and a 4750 mm length. If the marking is gone, measure the top width, height and angle, and compare them to 17 mm, 11 mm and 40 degrees.
- Can I replace just one belt on a multi-belt drive?
- On a drive with several belts, replace the full set at the same time. This keeps the load shared evenly across the grooves and avoids mismatched tension.
- What information should I send for a quote?
- Send the part number P-B187, or if it is not readable, the profile, length in mm, top width, height and angle. Photos of the old belt and the drive pulleys also help confirm the right belt.