V-belt Movendis P-B174
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B174 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B174 and any equivalents.
The Movendis P-B174 is a classical wrapped V-belt with a B profile and a 4420 mm length. It measures 17 mm across the top, stands 11 mm high, and has a 40° angle. This page gives you the exact profile and length so you can match an existing belt or specify a replacement.
The B profile is the key dimension here. A B-section belt sits in a B-groove, so the 17 mm top width and 11 mm height must match the pulley groove before anything else. The 4420 mm length is the datum length for this part. If your drive was built around a B profile and a 4420 mm belt, the P-B174 is the correct section and length.
Classical wrapped construction suits open drives where the belt runs over standard V-groove pulleys. The 40° angle is the included angle of the belt cross-section, which is what lets it wedge into the groove and transmit load. When you inspect a drive, check the pulley grooves for wear and the belt for cracks or glazing; a worn groove will not hold a new belt correctly even if the section is right.
To request a quote, send the part number P-B174 along with the profile and length from the old belt. If you are replacing a set, send the quantity of belts on the drive. The team can confirm the B profile and 4420 mm length from the marking or from your measurements.
Dimensions
- Section
- B
- Length
- 4420mm
Frequently asked questions
- What do the profile and length tell me about the P-B174?
- The profile is B, so the belt has a 17 mm top width and an 11 mm height, and it fits a B-section pulley groove. The length is 4420 mm, which is the datum length you match to the drive.
- How do I confirm this is the right belt for my drive?
- Check the old belt for a B profile marking and a 4420 mm length. Also measure the top width and height if the marking is worn. The 40° angle is standard for this classical V-belt section.
- What should I send to get a quote for the P-B174?
- Send the part number P-B174 and the quantity you need. If you are unsure of the profile or length, send the marking from the old belt or the top width, height, and length you measured.