V-belt Movendis P-B161.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B161.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B161.5 and any equivalents.
The Movendis P-B161.5 is a classical wrapped V-belt with a B profile and a 4100 mm length. When you are replacing a belt, the marking on the old belt is the first thing to check. This page explains how to match that marking to the P-B161.5.
Start by reading the back of the belt you are removing. Look for the profile letter and the length. The P-B161.5 is a B profile belt, so the old belt should also show a B profile. Its length is 4100 mm, and the top width is 17 mm with a height of 11 mm. The angle is 40 degrees. These dimensions are the basis for a correct match.
If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 4100 mm. Also confirm the top width is 17 mm and the height is 11 mm. A belt with a different profile or length will not sit correctly in the pulley grooves. When you request a quote, send the part number P-B161.5 and the details from your old belt.
Dimensions
- Section
- B
- Length
- 4100mm
Frequently asked questions
- How do I confirm the P-B161.5 matches my old belt?
- Check the marking on the back of the old belt for a B profile and a 4100 mm length. The P-B161.5 has a B profile, a 4100 mm length, a 17 mm top width, an 11 mm height, and a 40 degree angle.
- What if the old belt marking is faded?
- Measure the outside length and the top width. The P-B161.5 is 4100 mm long with a 17 mm top width and an 11 mm height. If those measurements match, the P-B161.5 is the correct profile and length.
- What should I send to request a quote?
- Send the part number P-B161.5 and the marking or measurements from the belt you are replacing. If you have the old belt, a photo of the back marking helps confirm the profile and length.