V-belt Movendis P-B145
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B145 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B145 and any equivalents.
The Movendis P-B145 is a classical wrapped V-belt with a B profile and a length of 3685 mm. Its 17 mm top width, 11 mm height and 40° angle match the dimensional standard for this profile, so you can select it by the marking on your existing belt.
When the profile and length on the old belt read B and 3685 mm, the P-B145 is the direct size to reference. The wrapped construction suits classical drives where the belt runs in a standard B-section sheave groove. Confirm the groove profile and the measured length against the numbers above before ordering.
Because length is fixed at 3685 mm, the P-B145 is not interchangeable with a B belt of another length even if the top width and height look the same. If the drive uses multiple belts, replace the full set so all belts carry equal load and wear at the same rate.
For a quote, send the part number P-B145 and the quantity you need. If you are unsure whether this is the correct belt for your drive, include the profile and length stamped on the back of the old belt, or a photo of the marking, and the team will confirm the match.
Dimensions
- Section
- B
- Length
- 3685mm
Frequently asked questions
- What do the profile and length tell me about the P-B145?
- The B profile sets the cross-section: 17 mm top width, 11 mm height and a 40° angle. The length is 3685 mm. Together these dimensions identify the belt size for a classical B-section drive.
- Can I use the P-B145 on any B-profile drive?
- Only where the required belt length is 3685 mm. A B-profile belt of a different length will not fit correctly, even though the cross-section is the same.
- What should I send to request a quote?
- Send the part number P-B145 and the quantity. If you want the match confirmed first, include the profile and length from the back of the old belt or a photo of the marking.