V-belt Movendis P-B137
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B137 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B137 and any equivalents.
The Movendis P-B137 is a classical wrapped V-belt in the B profile, with a length of 3480 mm. It is built for general industrial drives where a wrapped classical belt is the specified type. Use the profile and length to confirm it matches the belt you are replacing.
This belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. Its B profile and 3480 mm length are the key figures to check against your drive. Classical wrapped V-belts are used on fans, pumps, compressors, conveyors and other standard industrial equipment, so the old belt's markings and the pulley groove are your best references.
To confirm fit, read the marking on the back of the old belt and compare the profile letter and length. Measure the top width and height if the marking is worn, and check that the belt sits correctly in the pulley groove. If the drive uses multiple belts, replace the full set at the same time so the load stays even.
For a quote, send the part number P-B137, the profile B and the length 3480 mm, along with the quantity you need. If you are unsure of the exact belt, send a photo of the old belt's back marking and the drive nameplate. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 3480mm
Frequently asked questions
- How do I confirm the P-B137 fits my drive?
- Check the old belt's back marking for the B profile and a 3480 mm length. Also confirm the top width of 17 mm and height of 11 mm against the belt you are replacing, and make sure it seats properly in the pulley groove.
- What should I send to get a quote?
- Send the part number P-B137, the profile B, the length 3480 mm and the quantity. If you are unsure, include a photo of the old belt's marking and the drive nameplate so we can help confirm the right belt.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set together so the belts share the load evenly. Mixing a new belt with worn ones can cause uneven tension and faster wear.