V-belt Movendis P-B133.75
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B133.75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B133.75 and any equivalents.
This Movendis P-B133.75 is a classical wrapped V-belt in a B profile, 3400 mm long, with a 17 mm top width, 11 mm height and 40-degree angle. It is used on traditional belt drives where a wrapped classical V-belt is the specified type. Confirm fit by matching the profile and length marked on the old belt.
Classical wrapped V-belts like this one suit drives that call for a B-section belt rather than a narrow wedge, cogged or synchronous design. The wrapped construction is common on general industrial drives, so the belt is often found on fans, pumps, compressors and similar equipment where the original specification is a classical V-belt. If the drive was built around a B profile, this belt is the correct family to compare against.
To confirm fit, read the marking on the back of the belt you are replacing. You need the profile letter and the length, and both should match the B profile and 3400 mm length of the P-B133.75. Check the top width and height against the pulley groove as well: 17 mm across the top and 11 mm tall. If the old belt is worn or the marking is gone, measure the outside length and the top width, then send those figures with your quote request.
When you request a quote, include the part number P-B133.75 and the quantity you need. If you are replacing more than one belt on the same drive, list every belt position so the set can be quoted together. Send your request by WhatsApp or email and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 3400mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Match the profile and length marked on your old belt. This belt is a B profile, 3400 mm long, with a 17 mm top width, 11 mm height and 40-degree angle. If the marking is unreadable, measure the outside length and top width and send those figures with your request.
- What type of drives use a classical wrapped V-belt like this?
- Classical wrapped V-belts are used on drives specified for a B-section belt, typically general industrial equipment such as fans, pumps and compressors. They are not a substitute for narrow wedge, cogged, synchronous or multi-rib belts unless the drive was designed for that type.
- What should I send to get a quote?
- Send the part number P-B133.75 and the quantity you need by WhatsApp or email. If you are replacing several belts on one drive, list each position so the full set can be quoted.