V-belt Movendis P-B115
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B115 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B115 and any equivalents.
The Movendis P-B115 is a classical wrapped V-belt in a B profile with a length of 2921 mm. It is used on industrial drives where a wrapped classical belt is the specified replacement. Confirm fit by matching the profile and length to the belt you are replacing.
This belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. These dimensions identify the B profile and distinguish it from other classical sections. The length is 2921 mm, so check the marking on the old belt and compare both profile and length before ordering.
Classical wrapped V-belts are common on drives that run at moderate speeds with standard sheave grooves. Inspect the sheaves for wear, alignment and debris, and replace the belt if it shows cracking, glazing or cord exposure. If the drive uses multiple belts, replace the full set so the load stays evenly distributed.
To request a quote, send the part number P-B115 and the quantity you need by WhatsApp or email. If you are unsure whether this is the correct belt, include the profile and length from the old belt marking and the team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2921mm
Frequently asked questions
- How do I confirm that the P-B115 fits my drive?
- Check the marking on the old belt for the profile and length. This belt is a B profile with a length of 2921 mm, a top width of 17 mm, a height of 11 mm and a 40-degree angle. Match those values before ordering.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. Replacing the full set helps keep tension and load sharing even across the drive. Mixing new and used belts can cause the new belt to carry more load.
- What information should I send for a quote?
- Send the part number P-B115 and the quantity. If you are replacing an existing belt, include the profile and length from the old belt so the team can confirm the match.