V-belt Movendis P-B106
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B106 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B106 and any equivalents.
The Movendis P-B106 is a classical wrapped V-belt in a B profile, 2700 mm long. Before you fit it, inspect the drive so the new belt is not damaged by worn components.
Check the sheaves for wear, grooves that have become narrow or polished, and any nicks or burrs on the flanges. Misalignment between sheaves and a belt that sits below the groove edge will shorten belt life. Confirm the center distance and that the take-up allows the belt to be fitted without prying it over the flanges.
The P-B106 measures 2700 mm in length, with a 17 mm top width, 11 mm height and a 40-degree angle. These dimensions match the B profile, so the belt seats correctly in standard B-section grooves. If the old belt marking is unreadable, note these figures and the drive details for a quote.
When you replace a belt on a multi-belt drive, fit a full set of belts from the same production run. A new belt mixed with used belts will carry more than its share of the load. Send the part number, quantity and any drive details to our team by WhatsApp or email.
Dimensions
- Section
- B
- Length
- 2700mm
Frequently asked questions
- What are the dimensions of the Movendis P-B106?
- It is a B-profile classical wrapped V-belt with a length of 2700 mm, a top width of 17 mm, a height of 11 mm and a 40-degree angle.
- How do I check the sheaves before fitting this belt?
- Inspect the grooves for wear, narrow or polished surfaces, and any nicks or burrs on the flanges. Verify that the sheaves are aligned and that the belt will sit correctly in the groove.
- What should I send to request a quote for the P-B106?
- Send the part number P-B106, the quantity you need, and any drive details that help us confirm the belt. You can reach our team by WhatsApp or email.