V-belt Movendis P-AA70
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AA
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-AA70 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-AA70 and any equivalents.
The Movendis P-AA70 is a double-V (hexagonal) belt in the AA profile with a length of 1778 mm. It is built to run on both sides, so it fits drives that need power taken off more than one pulley face. This page covers what to check when matching it to the belt you are replacing.
Start with the marking on the belt you are removing. A double-V belt should show its profile and length on the back, and those two values are what identify the replacement. The P-AA70 carries the AA profile and a 1778 mm length. If the old belt is worn or the print has rubbed off, measure the outside length and confirm the cross-section before ordering.
A double-V belt is not the same as a standard single V-belt, and it is not a banded or cogged belt. The hex shape lets it bend around small pulleys and drive from either side, which is why it appears on reversing and multi-pulley drives. Check the pulleys for wear, alignment and debris while the belt is off, and replace both belts on a two-belt drive together so they share the load evenly.
We carry the Movendis P-AA70 for maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number, the profile and the 1778 mm length by WhatsApp or email and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- AA
- Length
- 1778mm
Frequently asked questions
- How do I confirm the P-AA70 is the right belt?
- Read the profile and length from the back of the belt you are replacing. The P-AA70 is an AA profile double-V belt with a 1778 mm length. If the marking is gone, measure the outside length and check the cross-section against the old belt.
- Can I use a single V-belt instead of this double-V belt?
- No. A double-V (hexagonal) belt drives from both sides, while a single V-belt drives from one. Match the profile and length to the drive, and replace both belts on a two-belt drive at the same time.
- What should I send to request a quote?
- Send the part number P-AA70, the profile AA and the length 1778 mm by WhatsApp or email. If you have the old belt, include a photo of the back marking and the pulley arrangement so the team can confirm the match.