V-belt Movendis P-A91.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A91.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A91.5 and any equivalents.
The Movendis P-A91.5 is a classical wrapped V-belt in the A profile, with a 2330 mm length. For a maintenance or purchasing professional, those two figures are the starting point: the profile has to match the sheave groove and the length has to match the drive center distance.
This belt carries an A profile, a 13 mm top width, an 8 mm height and a 40 degree angle. The wrapped construction suits classical V-belt drives where the belt runs in standard A-section pulleys. If you are replacing a belt on an existing drive, read the marking on the back of the old belt and compare the profile and length before ordering.
Length is stated as 2330 mm, so confirm this against the old belt or the drive layout rather than assuming a nearby size will fit. On multi-belt drives, replace the full set at the same time so the belts share the load evenly and wear at a similar rate. Inspect the sheaves for wear, alignment and contamination while the drive is open, since groove condition affects belt life.
To request a quote, send the part number P-A91.5, the quantity and the drive details by WhatsApp or email. If you are unsure whether this is the right belt, include the old belt marking and a photo of the drive, and the team can confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2330mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The A profile sets the cross-section that fits the sheave groove, and 2330 mm is the belt length. Both must match the drive for the belt to seat and tension correctly.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and check the profile and length against the P-A91.5. If the marking is worn, send a photo of the drive and the team can help confirm.
- Should I replace all belts on a multi-belt drive?
- Yes. Replacing the full set at once keeps the load shared evenly across the belts and avoids mixing new and worn belts on the same drive.