V-belt Movendis P-A88

MOVENDIS P-A88 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A88 and any equivalents.

The Movendis P-A88 is a classical wrapped V-belt in an A profile, 2240 mm long. It measures 13 mm across the top and 8 mm high, with a 40-degree angle. This page covers how to read the marking on the old belt so we can match the P-A88 correctly.

Start with the back of the belt. Wrapped V-belts carry the part number on the outside, and on a worn belt that printing can be faint or rubbed away. Wipe the surface and read it in good light. The P-A88 marking identifies a Movendis classical wrapped V-belt, A profile, 2240 mm long. If the number is unreadable, note the profile letter and the length instead.

The profile and length are what matter most for fit. This belt is an A profile at 2240 mm, with a 13 mm top width, 8 mm height and 40-degree angle. A belt that has been running may sit lower in the groove and look narrower than it is, so do not judge the profile by eye alone. Check the sheave groove for wear and confirm the belt sits correctly before ordering.

When you request a quote, send the part number P-A88 or the full marking from the back of the old belt. If the marking is gone, send the profile and length you measured. We carry Movendis belts and can confirm the right belt or suggest an equivalent.

For drives with more than one belt, replace the full set at the same time so the belts share the load evenly. Mixing a new belt with worn ones can overload the new belt and shorten its life.