V-belt Movendis P-A81.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A81.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A81.5 and any equivalents.
The Movendis P-A81.5 is a classical wrapped V-belt with an A profile and a 2070 mm length. It measures 13 mm across the top, 8 mm high, and has a 40° angle. This page covers how to match it to the belt you are replacing.
Start with the marking on the belt you are removing. Read the profile letter and the length, then compare them to the P-A81.5: A profile, 2070 mm length, 13 mm top width, 8 mm height, 40° angle. If the old belt is worn or the marking is gone, measure the top width and the outside length and compare those figures to the values above.
Confirm the drive takes a classical wrapped V-belt and not a narrow V-belt, cogged belt, banded belt, or another construction. A profile and length that match the P-A81.5 are the primary check; the 40° angle and the 13 mm by 8 mm cross-section describe the same belt.
When you request a quote, send the part number P-A81.5 and the profile and length from the old belt. If the marking is unreadable, send the top width, height, and length you measured. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2070mm
Frequently asked questions
- How do I match the Movendis P-A81.5 to the belt I am replacing?
- Compare the profile letter and length on the old belt to the A profile and 2070 mm length of the P-A81.5. Also check the cross-section: 13 mm top width, 8 mm height, and 40° angle.
- What should I send to request a quote for this belt?
- Send the part number P-A81.5, or the profile and length from the belt being replaced. If the marking is gone, send the top width, height, and length you measured.
- Can you help if the old belt marking is unreadable?
- Yes. Send the measured top width, height, and length, and the team can confirm whether the P-A81.5 fits or suggest an equivalent.