V-belt Movendis P-A59
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A59 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A59 and any equivalents.
The Movendis P-A59 is a classical wrapped V-belt in the A profile, with a 1500 mm length, a 13 mm top width, an 8 mm height and a 40 degree angle. We carry it for maintenance and purchasing teams who need the exact size on the belt marking. Before you fit it, take a few minutes to check the drive and the sheaves.
A new belt on worn or misaligned sheaves will not run as it should. With the drive locked out, inspect the groove flanks for wear, scoring and buildup, and check that the sheaves are aligned and free of runout. Look at the bearings and the shaft for play, and confirm the guard and mounting hardware are sound. Correcting these points first protects the belt and keeps the drive running as designed.
The P-A59 is a wrapped classical V-belt, A profile, 1500 mm long, 13 mm top width, 8 mm height, 40 degree angle. When you replace it, match the profile and the length to the marking on the old belt and confirm the sheave groove is correct for an A section. On multi-belt drives, fit the full set at once so the belts share the load evenly.
If you are unsure whether the P-A59 is the right belt for a drive, send the part number, the profile and the length from the old belt, plus the sheave or pulley details, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1500mm
Frequently asked questions
- What are the dimensions of the Movendis P-A59?
- It is an A profile classical wrapped V-belt with a 1500 mm length, a 13 mm top width, an 8 mm height and a 40 degree angle.
- Should I check the sheaves before fitting this belt?
- Yes. Inspect the groove flanks for wear and scoring, check alignment and runout, and look for bearing or shaft play. A worn or misaligned sheave will shorten belt life and affect how the drive runs.
- What do I need to send for a quote?
- Send the part number P-A59, the profile and length from the old belt, and the sheave or pulley details. Our team replies promptly and can help confirm the right belt or suggest an equivalent.