V-belt Movendis P-A51
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A51 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A51 and any equivalents.
The Movendis P-A51 is a classical wrapped V-belt in the A profile, with a listed length of 1300 mm. When you pull the old belt from the drive, the marking on its back is the fastest way to confirm the replacement. Read the profile and length there, then match them against this page.
The marking on a worn belt carries the profile and the length. On the P-A51, the profile is A, the length is 1300 mm, the top width is 13 mm, the height is 8 mm, and the angle is 40°. A wrapped classical V-belt like this one is a common drive component, and the back marking is usually the only identification left once the belt is off and dirty.
If the marking is rubbed off or hard to read, measure what you can and note the drive it came from. The P-A51 belongs to the Movendis Classical Wrapped V-Belts series, and the dimensions above are what we check against your request. Send the part number, or the profile and length you read from the old belt, and we will confirm the match or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1300mm
Frequently asked questions
- Where is the part number on the old belt?
- It is printed on the back of the belt, the side that runs against the pulley. Clean that surface and look for the profile and length marking. On this belt the marking corresponds to the Movendis P-A51, A profile, 1300 mm.
- What measurements should I send with the part number?
- Send the part number and, if you have them, the profile and length you read from the belt. The P-A51 is an A profile belt with a listed length of 1300 mm, a top width of 13 mm, a height of 8 mm and a 40° angle.
- How do I request a quote for the P-A51?
- Send the part number P-A51 by WhatsApp or email. If the old belt is unmarked, include the profile and length you measured, and we will confirm the right belt or suggest an equivalent.