V-belt Movendis P-A48
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A48 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A48 and any equivalents.
The Movendis P-A48 is a classical wrapped V-belt with an A profile and a 1220 mm length. If you are replacing a belt on an existing drive, this page gives you the dimensions to match against the belt you are removing.
To match the P-A48 to the belt being replaced, start with the marking on the back of the old belt. Confirm the profile is A, then check the length: 1220 mm. The cross-section is 13 mm at the top, 8 mm high, with a 40° angle. These are the dimensions to compare before ordering.
A wrapped classical V-belt like this one is used on drives where the original belt was specified as a classical A-profile. If the old belt is worn, stretched or unmarked, measure the top width and height at a clean section, and measure the outside length along the back. Send those numbers with your quote request.
We carry the Movendis P-A48 for maintenance, engineering and purchasing teams in the US, Canada, Mexico and South America. To request a quote, send the part number P-A48 by WhatsApp or email. If you are unsure whether this is the correct belt, include the old belt marking and the drive details, and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1220mm
Frequently asked questions
- How do I confirm the Movendis P-A48 is the right belt for my drive?
- Check the marking on the old belt for an A profile and a 1220 mm length. If the marking is unreadable, measure the top width (13 mm), height (8 mm) and outside length, and send those dimensions with your quote request.
- What are the dimensions of the P-A48?
- The P-A48 has an A profile, a 1220 mm length, a 13 mm top width, an 8 mm height and a 40° angle.
- What information should I send to request a quote?
- Send the part number P-A48 by WhatsApp or email. If you are replacing an existing belt, include the old belt marking or the measured dimensions and the drive details so we can confirm the right belt or suggest an equivalent.