V-belt Movendis P-A45.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A45.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A45.5 and any equivalents.
The Movendis P-A45.5 is a classical wrapped V-belt with an A profile and a length of 1168 mm. It measures 13 mm across the top, 8 mm in height and has a 40° angle. This page helps you match it to the belt you are replacing.
Before you order, read the marking on the back of the old belt. Confirm the profile letter is A and the length matches 1168 mm. Check the top width of 13 mm, the height of 8 mm and the 40° angle against the pulley groove. If the old belt is worn or the marking is gone, measure the outside length and the top width with a caliper.
A classical wrapped V-belt like the P-A45.5 is used on drives that take a single belt or a set. When you replace a belt on a multi-belt drive, replace all belts in the set at the same time so the load stays even. Inspect the pulleys for wear, oil or debris before you install the new belt, and check the tension after the first run-in.
Send the part number P-A45.5, the profile A and the length 1168 mm when you request a quote by WhatsApp or email. If you are unsure about the marking, send a photo of the old belt and the pulley groove. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1168mm
Frequently asked questions
- How do I confirm the P-A45.5 matches my old belt?
- Check the marking on the back of the old belt for the A profile and the 1168 mm length. Measure the top width at 13 mm, the height at 8 mm and confirm the 40° angle fits the pulley groove.
- What should I send to request a quote?
- Send the part number P-A45.5, the profile A and the length 1168 mm by WhatsApp or email. If the marking is unreadable, include a photo of the old belt and the pulley.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set together so the belts share the load evenly. Inspect the pulleys for wear or contamination before installation.