V-belt Movendis P-A42.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A42.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A42.5 and any equivalents.
The Movendis P-A42.5 is a classical wrapped V-belt with an A profile and a 1080 mm length. Its 13 mm top width, 8 mm height and 40° angle define how it seats in a standard A-section pulley groove. Use these dimensions to confirm the belt your drive requires.
Profile and length are the first checks when reading a belt marking or matching a worn belt. The A profile sets the cross-section that must sit correctly in the pulley groove, while the 1080 mm length determines the path around the drive. A belt with the wrong profile can bottom out or ride too high; the wrong length changes tension and pulley contact.
The P-A42.5 is a wrapped classical V-belt. Its 13 mm top width and 8 mm height match the A profile, and the 40° angle reflects the standard groove geometry for this section. Confirm these values against the old belt or the drive documentation before ordering.
To request a quote, send the part number P-A42.5 by WhatsApp or email. If you are unsure whether this classical V-belt is the correct replacement, include the belt marking, the pulley groove profile and the measured length so the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1080mm
Frequently asked questions
- What do the profile and length tell me about the Movendis P-A42.5?
- The A profile means the belt has a 13 mm top width and 8 mm height, sized for a standard A-section pulley groove. The 1080 mm length is the belt's datum length, which must match the drive's required length for correct tension and pulley contact.
- How can I confirm the P-A42.5 is the right belt for my drive?
- Check the marking on the old belt and measure its length. Compare the profile, top width, height and length against the drive documentation or the existing belt. If the numbers match, the P-A42.5 is the correct size.
- What information should I send with my quote request?
- Send the part number P-A42.5. If you are unsure about the replacement, also include the belt marking, the pulley groove profile and the measured length so the team can help confirm the correct belt.