V-belt Movendis P-A40.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A40.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A40.25 and any equivalents.
The Movendis P-A40.25 is a classical wrapped V-belt with an A profile and a 1025 mm length. To match it to the belt being replaced, compare the profile and the length marked on the old belt, then confirm the cross-section dimensions.
Start by reading the marking on the back of the belt you are replacing. The P-A40.25 carries an A profile and a 1025 mm length, so the old belt should show the same profile letter and length. If the marking is worn or missing, measure the top width and height: this belt is 13 mm across the top and 8 mm high, with a 40° angle.
A classical V-belt is selected by profile and length, not by the equipment it came from. If the drive uses more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the sheaves for wear or debris before installing the new belt.
Send the part number P-A40.25 by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt, include the profile and length from the old belt, or a photo of the marking, and the team can help confirm the right belt.
Dimensions
- Section
- A
- Length
- 1025mm
Frequently asked questions
- How do I confirm the P-A40.25 matches the belt I am replacing?
- Compare the profile and length marked on the old belt. The P-A40.25 is an A profile belt with a 1025 mm length. If the marking is not readable, measure the top width (13 mm) and height (8 mm).
- What should I send to request a quote?
- Send the part number P-A40.25 by WhatsApp or email. If you want us to confirm it against your old belt, include the profile and length from the old belt or a photo of its marking.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace the full set together so they wear evenly. Inspect the sheaves for wear or debris before installing the new belts.