V-belt Movendis P-A35

MOVENDIS P-A35 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A35 and any equivalents.

The Movendis P-A35 is a classical wrapped V-belt with an A profile and an 890 mm length. It measures 13 mm across the top and 8 mm in height, with a 40 degree angle. This page covers how to identify the belt from the marking on the old part before you request a quote.

When a drive is down, the fastest way to confirm the correct replacement is to read the marking printed on the back of the old belt. That marking carries the part number, and for this belt it should read P-A35. Match that number against the profile and length on this page: A profile, 890 mm, 13 mm top width, 8 mm height, 40 degree angle. If the old belt is worn, glazed or the marking has rubbed off, note the drive it came from and send that detail with your request.

A wrapped classical V-belt like the P-A35 is used on standard industrial drives where the pulley groove matches the A profile. Before ordering, inspect the pulleys for wear, check alignment and confirm the belt sits correctly in the groove. On multi-belt drives, replace all belts in the set at the same time so the load stays evenly distributed.

To request a quote, send the part number P-A35 by WhatsApp or email. If you are unsure whether this is the right belt, include the old marking, the profile and the length you measured, and the team will confirm the match or suggest an equivalent.