V-belt Movendis P-A32
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A32 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A32 and any equivalents.
The Movendis P-A32 is a classical wrapped V-belt with an A profile and an 813 mm length. It is used in general industrial drives where a standard classical cross-section is required. Confirm fit by matching the profile, length and cross-section dimensions to the drive.
This belt has a top width of 13 mm, a height of 8 mm and a 40-degree angle. These dimensions, together with the A profile and 813 mm length, are the key figures to check against the pulley groove and the old belt. Classical wrapped V-belts are common on fans, pumps, compressors and other general machinery where a single or multi-belt drive runs at moderate speed.
To confirm the belt suits your application, read the marking on the back of the old belt and compare it with the P-A32. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and check that the pulley groove matches the A profile. When replacing a set, fit all belts at the same time so the load is shared evenly.
Dimensions
- Section
- A
- Length
- 813mm
Frequently asked questions
- How do I confirm the Movendis P-A32 fits my drive?
- Check the old belt marking and compare the profile, length and cross-section. The P-A32 is an A-profile belt, 813 mm long, with a 13 mm top width, 8 mm height and 40-degree angle.
- Can I use this belt on a drive that takes a different profile?
- No. The profile must match the pulley groove. Use the P-A32 only where an A-profile classical V-belt is specified.
- What should I send to request a quote?
- Send the part number P-A32 and the quantity you need by WhatsApp or email. If you are unsure of the profile or length, include the marking from the old belt or the drive details.