V-belt Movendis P-A217
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A217 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A217 and any equivalents.
The Movendis P-A217 is a classical wrapped V-belt in an A profile. It measures 5512 mm in length, with a 13 mm top width, an 8 mm height and a 40-degree angle. Use these four dimensions to confirm the belt matches the drive before you order.
The A profile sets the cross-section that must seat correctly in the pulley groove: 13 mm across the top, 8 mm thick, with a 40-degree angle. The 5512 mm length is the outside dimension to check against the drive. If your current belt carries a different profile or a different length, it is not this belt.
For a quote, send the part number P-A217 along with the profile and length you need. If the marking on the back of your old belt is worn or unreadable, measure the top width, height and length and send those values instead. We carry the Movendis classical wrapped V-belt line and will confirm the P-A217 against your data.
On a drive that runs more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear or debris while the belts are off, and check that the new belt sits at the correct depth in the groove before tensioning.
Dimensions
- Section
- A
- Length
- 5512mm
Frequently asked questions
- What do the profile and length tell me about the P-A217?
- The A profile gives a 13 mm top width, 8 mm height and 40-degree angle, and the length is 5512 mm. Together these define the belt's cross-section and fit on the drive.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt, or measure its top width, height and length. Match those values to the P-A217 data: A profile, 13 mm top width, 8 mm height, 40-degree angle, 5512 mm length.
- What should I send to request a quote?
- Send the part number P-A217 by WhatsApp or email. If you are unsure of the profile or length, include your measurements and the drive details, and the team will confirm the belt.