V-belt Movendis P-A136
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A136 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A136 and any equivalents.
This Movendis P-A136 is a classical wrapped V-belt in the A profile, with a 3455 mm length. The 13 mm top width, 8 mm height and 40° angle define a standard A-section belt. Use these dimensions to confirm the belt matches your drive before you order.
The profile and length are the two figures that decide fit. A profile sets the cross-section: 13 mm across the top, 8 mm high, with 40° flanks that seat in an A-section pulley groove. The 3455 mm length is the datum you compare against the old belt or the drive drawing. If the profile is right but the length is wrong, the belt will not tension correctly.
For a quote, send the part number P-A136 and confirm the profile and length you need. If you are replacing a belt that is worn or unmarked, measure the outside length and check the cross-section, then send both figures. We carry Movendis classical wrapped V-belts and can confirm the P-A136 against your dimensions.
Inspect the pulleys when you change the belt. Worn grooves, misalignment or damaged sheaves will shorten the life of any new belt, including this one. Keep the old belt for comparison until the replacement is seated and tensioned.
Dimensions
- Section
- A
- Length
- 3455mm
Frequently asked questions
- What are the dimensions of the Movendis P-A136?
- It is an A-profile classical V-belt with a 3455 mm length, 13 mm top width, 8 mm height and 40° angle.
- How do I confirm this belt fits my drive?
- Check that your pulley groove takes an A-section belt and that the required length is 3455 mm. Compare against the marking on the old belt or the drive drawing.
- What should I send to request a quote?
- Send the part number P-A136, or the profile and length if you are matching an unmarked belt. We will confirm the belt against those figures.