V-belt Movendis P-A130
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A130 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A130 and any equivalents.
The Movendis P-A130 is a classical wrapped V-belt with an A profile and a 3305 mm length. It measures 13 mm across the top, 8 mm in height and has a 40° angle. If you are replacing a belt on an existing drive, this page helps you confirm the P-A130 matches what you are taking off.
Start with the marking on the belt being replaced. A classical V-belt carries its profile and length on the back, so compare that marking against the P-A130: profile A, 3305 mm length. Then check the belt against the pulley groove. A 13 mm top width and 8 mm height should sit correctly in an A-section sheave, and the 40° angle is the standard wedge angle for this profile.
If the old belt is worn, stretched or unmarked, measure it before ordering. Confirm the outside length reads 3305 mm and that the cross-section matches 13 mm by 8 mm. A belt that has run hot or slipped may no longer hold its original dimensions, so a measurement from a new or known-good belt is more reliable.
Send the part number P-A130 and the drive details for a quote. If you are unsure whether this Movendis classical wrapped V-belt is the correct replacement, include the old belt marking and a photo of the drive. The team can confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 3305mm
Frequently asked questions
- How do I confirm the P-A130 is the right replacement?
- Check the marking on the back of the belt you are removing. It should show an A profile and a 3305 mm length. Also verify the cross-section: 13 mm top width and 8 mm height, with a 40° angle.
- What if the old belt marking is unreadable?
- Measure the belt. The outside length should be 3305 mm, and the cross-section should measure 13 mm across the top and 8 mm in height. Send those measurements with your request so the team can confirm the P-A130.
- Can I request a quote for the P-A130 by WhatsApp or email?
- Yes. Send the part number P-A130 and any drive details you have. If you need help confirming the right belt or an equivalent, include the old belt marking or a photo of the drive.