V-belt Movendis P-A113
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A113 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A113 and any equivalents.
This Movendis P-A113 is a classical wrapped V-belt in profile A with a length of 2870 mm. It is used on drives that call for a wrapped classical V-belt rather than a narrow wedge, cogged or synchronous design. Confirm fit by comparing the profile and the length to the belt you are replacing.
Classical wrapped V-belts are common on general industrial drives where the pulley groove is cut for a classical profile. The A profile here has a 13 mm top width, an 8 mm height and a 40° angle. The length is 2870 mm. These three dimensions, together with the profile letter, are what determine whether the belt will sit correctly in the sheave.
The most reliable way to confirm fit is to read the marking on the back of the old belt and match the profile and length. If the marking is worn or missing, measure the top width and the outside length of the old belt and compare them with the 13 mm and 2870 mm given for this belt. Also check the sheave groove for wear, since a worn groove can make a correct belt ride too low.
When you request a quote, send the part number P-A113 and the profile and length you need. If you are replacing more than one belt on the same drive, list every belt position so the set can be matched. Our team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2870mm
Frequently asked questions
- What does the profile A mean on this belt?
- Profile A is a classical V-belt cross-section. This belt has a 13 mm top width, an 8 mm height and a 40° angle. Match it to the sheave groove and to the belt you are replacing.
- How do I confirm the length is correct?
- Compare the 2870 mm length with the marking on the old belt or with the measured outside length. If the old marking is unreadable, measure the old belt and check the sheave groove for wear before ordering.
- What should I send to get a quote?
- Send the part number P-A113, the profile and the length you need. If several belts run on the same drive, include each position so the set can be matched.