V-belt Movendis P-A110
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A110 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A110 and any equivalents.
The Movendis P-A110 is a classical wrapped V-belt in the A profile. It measures 2800 mm in length, with a 13 mm top width, an 8 mm height and a 40 degree angle. Before fitting it, inspect the drive and sheaves so the new belt runs true from the start.
A worn belt often shares the blame with worn sheaves. Check groove walls for wear, scoring and polish, and look for a ridge at the bottom of the groove where the belt no longer grips. Confirm the sheaves are aligned and the grooves are clean and dry. A new P-A110 seated in a damaged groove will wear quickly and run hot.
Check the drive as a whole while the belt is off. Spin the sheaves for bearing noise or play, confirm the shafts turn freely, and look for oil, debris or heat buildup around the drive. Set the correct tension after fitting, then recheck it after the first run-in period.
On multi-belt drives, replace all belts in the set at the same time so the load is shared evenly. The P-A110 is a classical V-belt with a 13 mm top width, 8 mm height and 40 degree angle, at 2800 mm length.
Dimensions
- Section
- A
- Length
- 2800mm
Frequently asked questions
- What are the dimensions of the Movendis P-A110?
- It is an A profile classical V-belt, 2800 mm long, with a 13 mm top width, an 8 mm height and a 40 degree angle.
- What should I inspect before fitting this belt?
- Check sheave grooves for wear, scoring and ridges, confirm alignment, and inspect bearings and shafts for noise, play or heat. Clean the grooves before the belt goes on.
- How do I request a quote for the P-A110?
- Send the part number P-A110 by WhatsApp or email. Our team replies promptly and can help confirm the belt or suggest an equivalent.