Timing belt Movendis P-996-S2M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear S-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-996-S2M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-996-S2M-450 and any equivalents.
The Movendis P-996-S2M-450 is a timing belt in the Curvilinear S-Type series. Its profile is STD and its length is 996 mm. To match it to the belt you are replacing, confirm the part number on the old belt and compare the profile and length.
Before ordering, read the marking on the back of the belt you are replacing. The part number should read P-996-S2M-450. If the old belt is worn or the marking is unreadable, measure the length and note the profile. The profile is STD and the length is 996 mm.
A timing belt must match the drive's pulleys and the required length. Do not substitute a different profile or length. If you are unsure, send the old part number and photos of the belt and the drive to our team. We carry the Movendis P-996-S2M-450 and can help confirm it is the correct belt for your application.
Dimensions
- Profile
- STD
- Length
- 996mm
Frequently asked questions
- How do I confirm the Movendis P-996-S2M-450 is the right belt for my drive?
- Check the marking on the back of your old belt. It should show P-996-S2M-450. Also confirm the profile is STD and the length is 996 mm. If the marking is not clear, send us photos and measurements.
- What should I send to get a quote for this belt?
- Send the part number P-996-S2M-450, the quantity you need, and any details about the drive. If you are replacing a belt with a different number, include that number and photos so we can help you confirm the match.
- Can I use a belt with a different profile or length?
- No. The profile must match the pulleys and the length must match the drive. The Movendis P-996-S2M-450 has an STD profile and a length of 996 mm. Using a different profile or length may cause poor performance or damage.