Timing belt Movendis P-952-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-952-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-952-8M-480 and any equivalents.
The Movendis P-952-8M-480 is a curvilinear H-type timing belt with an HTD 8M profile, a 952 mm length and an 8 mm pitch. When you are replacing a belt on an existing drive, matching these three markings is the first step to getting the correct part.
Start by reading the marking on the back of the belt you are removing. Confirm that it shows an HTD 8M profile, a 952 mm length and an 8 mm pitch, and that the part number P-952-8M-480 matches your records or the drive documentation. The profile and the length are the two dimensions that must agree with the pulleys and the center distance of the drive.
If the old belt is worn, damaged or the marking is no longer legible, measure the drive instead. Count the teeth on the pulleys and check the tooth profile; an HTD 8M belt requires matching 8M pulleys. Measure the belt length along the pitch line, or confirm the center distance and pulley sizes so the 952 mm length can be verified. A belt that is too long or too short will not tension correctly.
Send the part number P-952-8M-480, or the profile and length you measured, to MR Industrial Accessories by WhatsApp or email. The team replies promptly and can confirm the right belt for your drive or suggest an equivalent when the original marking is unclear.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 952mm
Frequently asked questions
- How do I confirm that the P-952-8M-480 is the belt I need?
- Check the marking on the back of the belt being replaced. It should show the HTD 8M profile, a 952 mm length and an 8 mm pitch. If the marking is not readable, measure the pulley profile and the belt length along the pitch line.
- What information should I send for a quote?
- Send the part number P-952-8M-480, or the profile, length and pitch you measured from the drive. Photos of the old belt marking and the pulleys also help the team confirm the correct belt.
- Can MR help if the old belt marking is worn off?
- Yes. Provide the pulley tooth profile, the number of teeth and the center distance, and the team can help identify the correct HTD 8M belt or suggest an equivalent.