Timing belt Movendis P-820-D/5M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-820-D/5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-820-D/5M-180 and any equivalents.
The Movendis P-820-D/5M-180 is a double-sided timing belt in the Curvilinear Double-Sided Timing Belts series, with a length of 820 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check the sheaves for worn grooves, burrs, corrosion or debris, and confirm they are clean and aligned. Look for oil or grease on the drive, and correct any leaks before installation. A double-sided timing belt contacts both sides, so both sets of pulley flanks and any idlers or tensioners must be in good condition.
Confirm the old belt marking matches the replacement: P-820-D/5M-180, with a length of 820 mm. If the drive has more than one belt, replace the set together so load is shared evenly. After fitting, verify tension and rotation direction, then recheck alignment and tension after the first run-in period.
Dimensions
- Length
- 820mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, burrs, corrosion and debris, confirm they are clean and aligned, and correct any oil or grease leaks. Check idlers and tensioners as well, since a double-sided timing belt contacts both sides.
- How do I confirm this is the correct replacement belt?
- Read the marking on the back of the old belt and match it to the Movendis P-820-D/5M-180. The length is 820 mm. If the marking is unreadable, send the part number and photos of the old belt and the drive for confirmation.
- What information do you need to quote this belt?
- Send the part number P-820-D/5M-180, the quantity, and the marking from the old belt if you have it. Photos of the belt and the drive help us confirm the correct item.