Timing belt Movendis P-813-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-813-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-813-3M-450 and any equivalents.
This Movendis P-813-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile and an 813 mm length. It is used in compact, low-power drives where precise synchronization is required, such as small conveyors, packaging mechanisms, and light-duty positioning systems.
To confirm fit, check the old belt's back marking for the profile and length. The HTD 3M profile indicates a 3 mm pitch, and the 813 mm length is the datum length. Compare these values with the drive's pulley grooves and center distance before ordering.
If the marking is worn or missing, measure the belt width and count the teeth, then match the profile and length to the drive specifications. The P-813-3M-450 is a direct replacement when the original belt carries the same profile and length.
For a quote, send the part number P-813-3M-450, the quantity, and any drive details you have. Our team can confirm the belt or suggest an equivalent based on the profile and length.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 813mm
Frequently asked questions
- How do I confirm that the P-813-3M-450 is the correct belt for my drive?
- Check the marking on the back of the old belt. It should show the HTD 3M profile and the 813 mm length. If the marking is unreadable, measure the pitch and the length or count the teeth and compare with the drive specifications.
- What information should I send to request a quote?
- Send the part number P-813-3M-450, the quantity you need, and any details about the drive or the old belt. If you have the old belt, a photo of the back marking helps us confirm the profile and length.
- Can this belt be used in a set with other belts?
- Yes, if the drive uses multiple belts, replace them as a set to maintain even tension and synchronization. Provide the quantity and the part number for each belt when requesting a quote.