Timing belt Movendis P-805-5M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-805-5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-805-5M-450 and any equivalents.
The Movendis P-805-5M-450 is a curvilinear H-type timing belt with an HTD 5M profile, an 805 mm length and a 5 mm pitch. If you are replacing a belt on a drive, the most reliable approach is to match the belt you are removing rather than working from the machine alone.
Start with the marking on the back of the old belt. Read the profile and the length directly from it and compare them to the HTD 5M profile and 805 mm length of the P-805-5M-450. A belt that has run for a long time can be difficult to read, so clean the back and check it under good light before you order.
If the marking is worn off, measure the old belt and confirm the tooth profile against the pulley grooves. The P-805-5M-450 is a curvilinear H-type timing belt, so the pulley must match the HTD 5M tooth form. Also check the drive for worn pulleys, correct alignment and proper tension before installing a new belt.
When you request a quote, send the part number P-805-5M-450, the profile HTD 5M and the length 805 mm. If you are unsure whether this is the correct belt, send a photo of the old belt marking and the pulley, and we can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 805mm
Frequently asked questions
- How do I confirm the P-805-5M-450 is the right belt for my drive?
- Read the profile and length from the marking on the back of the belt you are replacing and compare them to the HTD 5M profile and 805 mm length of the P-805-5M-450. If the marking is not legible, measure the old belt and check the pulley tooth form.
- What should I send to request a quote?
- Send the part number P-805-5M-450, along with the profile HTD 5M and the length 805 mm. If you are unsure, include a photo of the old belt marking and the pulley so we can help confirm the right belt or suggest an equivalent.
- What should I inspect on the drive before replacing the belt?
- Check the pulleys for wear, confirm the belt runs aligned on the pulleys and set the correct tension. Worn or misaligned pulleys can shorten the life of a new timing belt.