Timing belt Movendis P-768-D/S3M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-768-D/S3M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-768-D/S3M-180 and any equivalents.
The Movendis P-768-D/S3M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a length of 768 mm. Double-sided timing belts drive from both faces, which suits reversing and serpentine layouts where a single-sided belt cannot transmit to two pulleys in opposite directions. Use the part number and the 768 mm length to confirm the belt against the drive you are working on.
This belt is built for synchronous drives that need power taken off both sides of the belt. Common places to look are reversing shafts, twin-cam arrangements and multi-pulley timing layouts where the belt wraps pulleys on its back as well as its tooth side. Before ordering, read the marking on the old belt and compare the part number, then check the profile and the 768 mm length against the drive drawing or the belt you removed.
Fit also depends on the condition of the drive, not just the belt. Inspect the pulleys for worn teeth, check the tensioner and idler for play, and confirm the belt runs square on the pulleys. If the old belt is damaged, note where it failed so the cause can be corrected before the replacement goes on.
Send the part number, the length and a photo of the back of the old belt if the marking is worn. Our team can confirm the belt or suggest an equivalent, and quotes are handled by WhatsApp or email.
Dimensions
- Length
- 768mm
Frequently asked questions
- How do I confirm the P-768-D/S3M-180 fits my drive?
- Read the part number on the old belt and check it against the drive drawing. Confirm the belt is double-sided, then match the length of 768 mm and the profile to what the drive requires.
- What should I send for a quote?
- Send the part number P-768-D/S3M-180, the length of 768 mm and the drive it goes on. A photo of the back of the old belt helps if the marking is hard to read.
- What should I check on the drive before replacing the belt?
- Inspect the pulleys for worn or hooked teeth, check the tensioner and idler for play, and look at how the old belt failed. Correcting the cause first helps the replacement belt run properly.