Timing belt Movendis P-728-D/8M-180

MOVENDIS P-728-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-728-D/8M-180 and any equivalents.

The Movendis P-728-D/8M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a length of 728 mm. It is built for drives that need synchronous power transmission from both faces of the belt. Before you fit it, take a few minutes to inspect the drive.

Start with the sheaves. Look for worn tooth flanks, hooked or rounded teeth, and material buildup in the grooves. A sheave that has worn out of profile will wear a new belt quickly, so replace or rework anything that no longer matches the tooth form. Check both the driving and driven pulleys, since a double-sided belt contacts both.

Next, check alignment and tension. Confirm the shafts are parallel and the sheaves are in line, then verify the flanges are not rubbing the belt edges. Inspect the bearings and any idlers or tensioners in the drive for play, noise or rough rotation. Correct these items first, then install the belt and set tension to the drive manufacturer's specification.

The belt is marked P-728-D/8M-180, and the 728 mm length is the figure to match against the old belt. If you are working from a belt that has lost its marking, measure the length and send us the part number so we can help confirm the right belt for the drive.