Timing belt Movendis P-726-3M-450

MOVENDIS P-726-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-726-3M-450 and any equivalents.

The Movendis P-726-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile, a 726 mm length and a 3 mm pitch. Before you install it, take a few minutes to inspect the drive and sheaves. A worn or misaligned drive will shorten the life of any new belt, no matter how good the belt is.

Start by checking the sheaves for wear. Look for hooked or sharp tooth profiles, cracks, chips, or debris packed into the grooves. On HTD drives, worn sheaves can quickly damage a new belt. Also check that the sheaves are aligned and that the bearings turn freely without play or roughness. If you find problems, correct them before fitting the Movendis P-726-3M-450.

When you install the belt, set the tension according to the drive manufacturer's specification. Too little tension can cause the belt to jump teeth; too much tension can overload the bearings and the belt. After running the drive for a short time, recheck the tension and re-tension if needed. Keep the drive clean and free of oil, grease, and dust.

If you need this belt, send the part number P-726-3M-450 by WhatsApp or email. Our team can confirm it matches your drive and help you with the right belt. We supply customers in the US, Canada, Mexico, and South America.