Timing belt Movendis P-711-D/S4.5M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-711-D/S4.5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-711-D/S4.5M-180 and any equivalents.
The Movendis P-711-D/S4.5M-180 is a double-sided timing belt with a length of 711 mm. When you are replacing a belt on a drive that uses teeth on both sides, this is the number to check against the belt you are removing.
To confirm the match, read the marking printed on the back of the belt you are taking off. The part number, the belt type and the length should line up with the P-711-D/S4.5M-180. If the old belt is worn or the marking has rubbed away, measure the length and note that the drive runs a double-sided timing belt, then send those details with your request.
Because a double-sided timing belt drives from both faces, a single-sided belt will not work in its place. Confirm that the pulleys on your drive are toothed on both sides and that the belt path requires teeth on the inside and the outside. If your drive instead uses a single-sided timing belt, tell us that when you write, and we will help you identify the correct belt for that setup.
Dimensions
- Length
- 711mm
Frequently asked questions
- How do I match the P-711-D/S4.5M-180 to my old belt?
- Compare the part number and the 711 mm length against the marking on the back of the belt you are replacing. Confirm the drive uses a double-sided timing belt before ordering.
- Can I use a single-sided timing belt instead?
- No. This belt is double-sided, so it has teeth on both faces. A single-sided belt will not drive correctly on a double-sided layout. Check the pulley arrangement on your drive first.
- What should I send to request a quote?
- Send the part number P-711-D/S4.5M-180, the length of 711 mm and the belt type, along with a photo of the marking on your old belt if it is still readable. We will confirm the belt and reply by WhatsApp or email.