Timing belt Movendis P-704-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-704-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-704-8M-480 and any equivalents.
The Movendis P-704-8M-480 is a curvilinear H-type timing belt with an HTD 8M profile, a 704 mm length, and an 8 mm pitch. If you are replacing a worn synchronous belt, start by matching these three values to the belt on the drive.
The most reliable way to identify the correct replacement is to read the marking on the back of the belt you are removing. Confirm the profile is HTD 8M, the length is 704 mm, and the pitch is 8 mm, then compare those figures with the P-704-8M-480. A belt that has stretched or worn may not measure exactly to its original length, so the back marking is a better reference than a used belt on the bench.
Inspect the drive before ordering. Check the pulleys for worn grooves, the flanges for damage, and the tensioner for smooth movement. A new timing belt will not correct a misaligned or worn drive, and it may fail early if those parts are not in good condition. If the drive uses more than one belt, replace the set together so the load is shared evenly.
We carry the Movendis P-704-8M-480 for maintenance, engineering, and purchasing teams. To request a quote, send the part number by WhatsApp or email. If you are unsure whether this is the right belt, include the marking from the old belt and a photo of the drive, and our team can help confirm the profile and length or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 704mm
Frequently asked questions
- How do I confirm the P-704-8M-480 matches my belt?
- Check the marking on the back of the old belt. The profile should read HTD 8M, the length should be 704 mm, and the pitch should be 8 mm. If those match the P-704-8M-480, it is the same size.
- Can I measure a used belt to identify it?
- A used belt may have stretched, so its measured length can differ from the original. Use the back marking as the primary reference and treat the measurement as a secondary check.
- What should I send for a quote?
- Send the part number P-704-8M-480 by WhatsApp or email. If you want us to confirm the fit, include the marking from the old belt and a photo of the drive.