Timing belt Movendis P-700-H-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Classical Imperial Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-700-H-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-700-H-480 and any equivalents.
The Movendis P-700-H-480 is a classical imperial timing belt with an H profile and a 1778 mm length. The profile sets the tooth form and pitch that must match your pulleys, and the length sets the center distance the belt will span. Both values are stated on the belt marking and should be confirmed against the drive before you order.
This is a synchronous belt, so it drives by tooth engagement rather than friction. The H profile is the determining factor: the belt only runs correctly on pulleys cut for that same profile. The 1778 mm length is the second check, since a belt of the right profile but the wrong length will not tension properly on the drive.
The cleanest way to confirm a replacement is to read the marking on the back of the belt you are removing. Compare the profile and the length against this page, and note the tooth count and width as well if they are printed there.
For a quote, send the part number P-700-H-480, or the profile and length from your old belt. If the marking is worn or the belt is gone, send the pulley data and the drive layout instead, and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- H
- Length
- 1778mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The H profile is the tooth form and pitch that must match your pulleys. The 1778 mm length is the distance the belt spans around the drive. Both need to match the belt you are replacing.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length with this page. If the marking is unreadable, send your pulley data and drive layout and we will help confirm it.
- What should I send to get a quote?
- Send the part number P-700-H-480, or the profile and length from your old belt, by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.