Timing belt Movendis P-699-D/3M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-699-D/3M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-699-D/3M-180 and any equivalents.
When you need to replace a double-sided timing belt, the marking on the old belt is your best reference. The Movendis P-699-D/3M-180 is a curvilinear double-sided timing belt with a 699 mm length. We carry this belt and can help you confirm it matches your drive.
This belt is identified by the code P-699-D/3M-180. The 699 mm length is the key dimension to compare against your existing belt. Because it is double-sided, it can drive pulleys on both faces, which is common in reversing or multi-pulley layouts.
To verify a match, read the marking on the back of your current belt. Look for the part number and the length. If the number is worn or unreadable, measure the belt and note the profile and tooth pattern. Send us the marking or your measurements, and we will confirm whether the P-699-D/3M-180 is the right replacement.
If you are replacing more than one belt on the same drive, it is good practice to inspect all belts and pulleys for wear and to replace belts in sets when they have run together. We can help you identify the correct belts for your application.
Dimensions
- Length
- 699mm
Frequently asked questions
- How do I confirm the Movendis P-699-D/3M-180 is the correct belt for my drive?
- Check the marking on your old belt. If it reads P-699-D/3M-180, this is the same belt. If the marking is not legible, measure the length and note the profile, then contact us for confirmation.
- What does double-sided mean on this timing belt?
- A double-sided timing belt has teeth on both sides, allowing it to drive pulleys on either face. This is useful in drives where the belt must turn in opposite directions or follow a complex path.
- What information should I send to request a quote?
- Send the part number P-699-D/3M-180, the quantity you need, and any details from the old belt marking. If you have the old belt, a photo of the marking helps us confirm the correct replacement.